Request a Quote for GIRDER 231933091 under NSN 5930-00-001-3091 by Dla Land And Maritime

Part Number: GIRDER 231933091

Alternate P/N: GIRDER231933091

Manufacturer: Dla Land And Maritime

NSN: 5930-00-001-3091

NIIN: 000013091

Item Name : Switch Rotary

CAGE Code: 16236

FSC: 5930 Switches

FSG: 59 Electrical and Electronic Equipment Components

Country : USA

NCB Code : 00

Rotable Parts Exchange serves as a comprehensive source for military products, aerospace equipment, and Switch Rotary items. You have expressed particular interest in part number GIRDER 231933091, a Dla Land And Maritime component we offer that is presented with the NSN 5930-00-001-3091 for straightforward identification and procurement. By completing and submitting the Request for Quote form provided on this page, you can obtain pricing details on this NSN part for your comparisons. Once our staff members receive and review your submitted information, a dedicated account manager will directly contact you with a response within 15 minutes or less.

Note : We Will Not Share Your Information To Any Third Parties.

Product Details

“*” Required Fields Are Compulsory

Contact Information

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-conditions.aspx . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

Upload RFQ SHEET

If you have more than one item, upload your spreadsheet here

Upload File

We strive to streamline the purchasing process and simplify it as much as possible, which includes providing detailed listings for all components to help customers pinpoint their exact needs. For instance, part number GIRDER 231933091 is manufactured by Dla Land And Maritime under the CAGE Code 16236. Additionally, by using the initial digits of the NSN 5930-00-001-3091, you can discover that this component is associated with the FSC 5930 Switches. If you have any specific questions about our database, you may always give us a call or email, as we would be delighted to assist you however we can. Otherwise, we encourage you to secure a quote for part number GIRDER 231933091 at your earliest convenience.

NSN Information for Part Number GIRDER 231933091 with NSN 5930-00-001-3091, 5930000013091

NSN	FSC	NIIN	CLS	Hazmat	DEMIL	Cancelled NSN
5930-00-001-3091 Item PartTypeName: SWITCH,ROTARY	5930	000013091	0	P
	CIIC	HCC	ESD	PMIC	Criticality	ENAC
	U			G
Part Number	ISC	RNVC	RNCC	HCC	MSDS	SADC
8002N10-8/ST/30	C	1	C			9

Characteristics Data of NSN 5930-00-001-3091, 5930000013091

MRC	Criteria	Characteristic
AAJD	THREAD CLASS	2B SINGLE MOUNTING FACILITY
ABHP	OVERALL LENGTH	11.000 INCHES NOMINAL
ABKW	OVERALL HEIGHT	2.375 INCHES NOMINAL
ABMK	OVERALL WIDTH	2.375 INCHES NOMINAL
ABWV	SHAFT DIAMETER	0.250 INCHES NOMINAL SINGLE ACTUATOR
ABXF	SHAFT LENGTH	2.000 INCHES NOMINAL SINGLE ACTUATOR
AFBH	INDIVIDUAL SECTION QUANTITY	8
AFDS	LONGEST HORIZONTAL DISTANCE BETWEEN MOUNTING CENTERS	1.250 INCHES NOMINAL SINGLE MOUNTING FACILITY
AJZE	SWITCH CONTACT BASIC DESIGN	NONPILE-UP SYMMETRICAL
AKPX	POLE QUANTITY	2 1ST SECTION REAR
AKPX	POLE QUANTITY	2 2ND SECTION FRONT
AKPX	POLE QUANTITY	2 3RD SECTION REAR
AKPX	POLE QUANTITY	2 4TH SECTION FRONT
AKPX	POLE QUANTITY	2 5TH SECTION REAR
AKPX	POLE QUANTITY	2 6TH SECTION FRONT
AKPX	POLE QUANTITY	2 7TH SECTION REAR
AKPX	POLE QUANTITY	2 8TH SECTION FRONT
AKPY	THROW QUANTITY	10 1ST SECTION REAR
AKPY	THROW QUANTITY	10 2ND SECTION FRONT
AKPY	THROW QUANTITY	10 3RD SECTION REAR
AKPY	THROW QUANTITY	10 4TH SECTION FRONT
AKPY	THROW QUANTITY	10 5TH SECTION REAR
AKPY	THROW QUANTITY	10 6TH SECTION FRONT
AKPY	THROW QUANTITY	10 7TH SECTION REAR
AKPY	THROW QUANTITY	10 8TH SECTION FRONT
AXGY	MOUNTING METHOD	BRACKET SINGLE MOUNTING FACILITY AND THREADED HOLE SINGLE MOUNTING FACILITY
CMLP	THREAD QUANTITY PER INCH	32 SINGLE MOUNTING FACILITY
CQJX	NOMINAL THREAD SIZE	0.164 INCHES SINGLE MOUNTING FACILITY
CQMK	CONTACT VOLTAGE RATING IN VOLTS	120.0 AC AT SEA LEVEL
CQYJ	MOUNTING FACILITY PATTERN	TWO POSITION IN-LINE SINGLE MOUNTING FACILITY
CRJH	SWITCH ACTUATOR INDEXING POSITION QUANTITY	10 SINGLE ACTUATOR
CRSJ	SHAFT TYPE	ROUND SINGLE ACTUATOR
CSCF	TERMINAL TYPE	TAB,SOLDER LUG AND TURRET
CSHW	CONTACT SWITCHING ACTION	BREAKS BEFORE MAKES 1ST SECTION REAR
CSHW	CONTACT SWITCHING ACTION	BREAKS BEFORE MAKES 2ND SECTION FRONT
CSHW	CONTACT SWITCHING ACTION	BREAKS BEFORE MAKES 3RD SECTION REAR
CSHW	CONTACT SWITCHING ACTION	BREAKS BEFORE MAKES 4TH SECTION FRONT
CSHW	CONTACT SWITCHING ACTION	BREAKS BEFORE MAKES 5TH SECTION REAR
CSHW	CONTACT SWITCHING ACTION	BREAKS BEFORE MAKES 6TH SECTION FRONT
CSHW	CONTACT SWITCHING ACTION	BREAKS BEFORE MAKES 7TH SECTION REAR
CSHW	CONTACT SWITCHING ACTION	BREAKS BEFORE MAKES 8TH SECTION FRONT
CSLC	SWITCH ACTUATOR POSITIONING INCREMENT	30.0 DEGREES SINGLE ACTUATOR
CTDN	SWITCH ACTUATOR STOP DEVICE TYPE	ADJUSTABLE STOP SINGLE ACTUATOR
CTHF	CONTACT LOAD CURRENT RATING	15.0 AMPERES RESISTIVE LOAD AC AT SEA LEVEL
PMLC	PRECIOUS MATERIAL AND LOCATION	CONTACT SURFACES GOLD AND CONTACTS AND WIPERS SILVER
PRMT	PRECIOUS MATERIAL	GOLD AND SILVER
STYL	STYLE DESIGNATOR	TAP,SQUARE FRAME
THSD	THREAD SERIES DESIGNATOR	UNC SINGLE MOUNTING FACILITY

Related NSN Components of GIRDER 231933091

GI-0124 Cover Access
5340013811418 (5340-01-381-1418)
Mi T M Corporation, CAGE Code 63995
5340 Hardware Commercial

GI-0132 Hinge Butt
5340013825046 (5340-01-382-5046)
Mi T M Corporation, CAGE Code 63995
5340 Hardware Commercial

GI-0212 Pan Top Heater Cove
4940013841464 (4940-01-384-1464)
Mi T M Corporation, CAGE Code 63995
4940 Miscellaneous Maintenance And Repair Shop Specialized Equipment

GI-0214 Cover Access
5340013811264 (5340-01-381-1264)
Mi T M Corporation, CAGE Code 63995
5340 Hardware Commercial

GI-0404 Manifold Assembly Hydraulic
4730013849419 (4730-01-384-9419)
Mi T M Corporation, CAGE Code 63995
4730 Hose Pipe Tube Lubrication and Railing Fittings

GI-0405 Manifold Hydraulic System Access
4730013846357 (4730-01-384-6357)
Mi T M Corporation, CAGE Code 63995
4730 Hose Pipe Tube Lubrication and Railing Fittings

GI-0406 Manifold Fueling
4730013818677 (4730-01-381-8677)
Mi T M Corporation, CAGE Code 63995
4730 Hose Pipe Tube Lubrication and Railing Fittings

GI-0514 Plug Pipe
4730013813833 (4730-01-381-3833)
Mi T M Corporation, CAGE Code 63995
4730 Hose Pipe Tube Lubrication and Railing Fittings

GI-0516 Pan Bottom
4940013841452 (4940-01-384-1452)
Mi T M Corporation, CAGE Code 63995
4940 Miscellaneous Maintenance And Repair Shop Specialized Equipment

330-1848-010

RFQ

347-12964

RFQ

A Complete NSN Part Purchasing Platform

AS9120B and ISO 9001:2015
Aviation Suppliers Association Member
FAA AC 0056B Accredited
AS 6081:2012 Certification
ESD S20.20-2014 Certification