| MRC | Criteria | Characteristic |
|---|
| AHLK | FIRST LEG HOLE DIAMETER | 0.194 INCHES MINIMUM AND 0.214 INCHES MAXIMUM |
| AHPW | FIRST LEG THICKNESS | 0.053 INCHES MINIMUM AND 0.073 INCHES MAXIMUM |
| AHPX | SECOND LEG THICKNESS | 0.053 INCHES MINIMUM AND 0.073 INCHES MAXIMUM |
| AHRB | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |
| AJZU | FIRST LEG STYLE | END RADIUS |
| AKAU | FIRST LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| MATT | MATERIAL | ALUMINUM ALLOY 2024 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/5,ALCLAD T3 FED SPEC SINGLE MATERIAL RESPONSE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625,TYPE 1 MIL SPEC SINGLE TREATMENT RESPONSE |
| ADLK | FIRST LEG LENGTH | 0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM |
| ADLL | SECOND LEG LENGTH | 0.680 INCHES MINIMUM AND 0.700 INCHES MAXIMUM |
| AHLF | SECOND LEG WIDTH | 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM |
| AHLN | SECOND LEG HOLE DIAMETER | 0.194 INCHES MINIMUM AND 0.214 INCHES MAXIMUM |
| AHLV | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |
| AHLW | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |
| AHQN | FIRST LEG WIDTH | 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM |
| AHRA | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |
| AJFP | FIRST LEG END RADIUS | 0.230 INCHES MINIMUM AND 0.270 INCHES MAXIMUM |
| AJFQ | SECOND LEG END RADIUS | 0.230 INCHES MINIMUM AND 0.270 INCHES MAXIMUM |
| AKBU | SECOND LEG STYLE | END RADIUS |
| AKCU | SECOND LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| CSSP | SECOND LEG RELATIONSHIP TO FIRST LEG | IDENTICAL |
| CSSQ | FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| SFTT | SURFACE TREATMENT | ANODIZE |
| STYL | STYLE DESIGNATOR | ANGLE |
